Plunge Semi-Automatic Cylindrical Grinder

Plunge Semi-Automatic Cylindrical Grinder

This machine tool is suitable for processing the end face and outer circle of small and medium parts at the same time by cutting into the semi-automatic feed mode. It can also grind the outer circle and conical surface of the workpiece individually.

J4-012A

Tel：

+86-0531-88681424

Related Products

Online Message

Plunge Semi-Automatic Cylindrical Grinder

Machine features:

★This machine tool is suitable for processing the end face and outer circle of small and medium parts at the same time in the way of plunging semi-automatic feed. It can also grind the outer circle and conical surface of the workpiece individually.

★The grinding wheel frame, head frame and worktable of the machine tool can be rotated at a certain angle, and the worktable and grinding wheel frame can be manually driven in addition to hydraulic drive. To suit workshop production or machine repair

★The machine tool can use the top and the chuck to clamp the workpiece

TECHNICAL SPECIFICATIONS

Height of center 100mm

Distance between centers 270 mm

Diameter to be ground φ5-φ125mm

Max. length to be ground Plunge grinding40 mm vertical grinding250 mm

Shoulder width of grinding table ≤10 mm

Table rotation angle ± 4°

Rotation angle of headstock ± 45°

Rotation angle of grinding wheel rack ± 180°

Max. weigth of workpiece 10kg

Dimensionof Max. grinding wheel φ300×（20-40）×φ127mm

Linear speed of grinding wheel ≤35m/s

Motor power of grinding wheel rack 2.2kw

Outline dimension of machine tool 1500×1200×1500mm

Net weight 1800Kg

Gross weigh 1900 Kg

WORKING ACCURACY（Grinding national standard test parts）

Roundness ：Top grinding outer circle 0.0015 mm

Chuck grinding 0.0025 mm

Cylindricity 0.003 mm

Surface roughness Ra0.32μm

Layout plan

1. The height of the host is 1300mm

2. The machine tool should be installed on a solid foundation away from the vibration source, and the installation level should be adjusted with the 3 pads under the machine tool. Check the levelness of the machine with a spirit level. Longitudinal ≤0.04/1000, transverse ≤0.04/1000, when the machine tool is adjusted, the necessary auxiliary pads can be added, and concrete can be injected to fix it

ONLINE MESSAGE