High-precision semi-automatic cylindrical grinder

High-precision semi-automatic cylindrical grinder

This machine tool is suitable for high-precision grinding of the outer cylindrical surface, outer conical surface, shoulder surface and end surface of the workpiece.

MG(B)1312

Tel：

+86-0531-88681424

Related Products

Online Message

High-precision semi-automatic cylindrical grinder

Machine Features：

★This machine tool is suitable for high-precision grinding of the outer cylindrical surface, outer conical surface, shoulder surface and end surface of the workpiece.

★The machine table, headstock and grinding wheel stand can be rotated to a certain angle, and the worktable and grinding wheel stand can be manually driven in addition to hydraulic drive.

★This machine tool can be processed by means of top, chuck or spring chuck to meet the needs of precision measuring tool production workshops, molds, and machine repair workshops

TECHNICAL SPECIFICATIONS

Height of center 100mm

Distance between centers 270 /520mm

Diameter to be ground φ5-φ125mm

Max. length to be ground 250 /500

Table rotation angle ± 9°/± 7°

Rotation angle of headstock Clockwise：10° Counterclockwise：90°

Rotation angle of grinding wheel rack ± 180°

Max. weigth of workpiece 10kg

Dimensionof Max. grinding wheel φ300×（10-40）×φ127mm

Linear speed of grinding wheel ≤35m/s

Motor power of grinding wheel rack 2.2kw

Outline dimension of machine tool

1550×1190×1600/2240×1190×1600mm

Net weight 1800/2100 Kg

Gross weight 1900 /2200 Kg

WORKING ACCURACY（Grinding national standard test pieces)

Roundness: center grinding outer circle 0.0005 mm

Chuck grinding 0.0015 mm

Chuck Inner Circle 0.0015 mm

Cylindricity: 0.002 mm

Surface Roughness: Top Grinding Cylindrical (Length) Ra: 0.05μm

Chuck Grinding Cylindrical (Long) Ra: 0.05μm

(short)

Chuck Grinding Inner Circle Ra: 0.05μm

Floor plan

1. Host height 1300mm

2. The machine tool should be installed on a solid foundation away from the vibration source, and the installation level should be adjusted with the 3 pads under the machine tool. Check the levelness of the machine with a spirit level. Vertical ≤0.04/1000, horizontal ≤0.04/1000, when the machine tool is adjusted, the necessary auxiliary pads can be added, and concrete can be injected to fix it

ONLINE MESSAGE