High-speed semi-automatic cylindrical grinder

High-speed semi-automatic cylindrical grinder

This machine is suitable for high-efficiency grinding of the outer cylindrical surface and outer conical surface of various small and medium-sized parts

MSB1312A

Tel：

+86-0531-88681424

Related Products

Online Message

High-speed semi-automatic cylindrical grinder

Machine features:

★This machine is suitable for high-efficiency grinding of the outer cylindrical surface and outer conical surface of various small and medium-sized parts.

★The grinding wheel frame, head frame and worktable of the machine tool can be rotated at a certain angle, and the worktable and grinding wheel frame can be manually driven in addition to hydraulic drive.

The cooling system adopts magnetic separator to remove chips, and can realize semi-automatic fixed-range cyclic grinding, which is suitable for batch production, especially mass production

★ This machine tool can use the center, chuck or spring chuck to clamp the workpiece

TECHNICAL SPECIFICATIONS

Height of center 100mm

Distance between centers 270 mm

Diameter to be ground φ5-φ125mm

Max. length to be ground 250 mm

Aperture to be ground φ10-φ40

Max. depth to be ground 50 mm

Table rotation angle ± 10°

Rotation angle of headstock Clockwise：10° Counterclockwise：90°

Rotation angle of grinding wheel rack ± 180°

Max. weigth of workpiece 10kg

Dimensionof Max. grinding wheel φ300×（20-40）×φ127mm

Linear speed of grinding wheel ≤50m/s

Motor power of grinding wheel rack 2.2kw

Outline dimension of machine tool

1550×1190×1300mm

Net weight 1500 Kg

Gross weight 1600 Kg

WORKING ACCURACY（Grinding national standard test parts）

Plunge Grinding Outer Roundness ：Top grinding outer circle 0.003 mm

Grinding the outer circle 0.005 mm

Longitudinal grinding outer roundness 0.003 mm

Grinding national standard test parts Ra0.32μm

Floor Plan

1. Host height 1300mm

2. The machine tool should be installed on a solid foundation away from the vibration source, and the installation level should be adjusted with the 3 pads under the machine tool. Check the levelness of the machine with a spirit level. Vertical ≤0.04/1000, horizontal ≤0.04/1000, when the machine tool is adjusted, the necessary auxiliary pads can be added, and concrete can be injected to fix it

ONLINE MESSAGE